• Brass Fixtures
• Bulbs
• Lampshades:
  • Cone Shades Available
  • Balls for Everywhere Else

4-1/4" Cross Bar with 8/32 Tapped Ground Hole
Grand Brass Lamp Parts

8/32 Steel Ground Screw
Grand Brass Lamp Parts

9/16" dia. Brass Hex Nut
Grand Brass Lamp Parts

Plated Steel Lock Washers
Grand Brass Lamp Parts

3/4" Steel Washer
Grand Brass Lamp Parts

Embossed Starburst Design Canopy, 5-1/4" Wide x 1" High
I drill 4-1/4" bar holes with my drill press. Hole size #26 drill bit.
Grand Brass Lamp Parts
Picture is not correct. The canopies are covered with oil and have stains. A 50/50 vinegar/water bath will remove the oil. Brass polish only partially removes the stains. A buffer is needed to fully remove the stains. Or buy from Walmart for more.

8/32 Slotted Round Head Brass Screws
Grand Brass Lamp Parts: 1" and 3" (longest)

Long Up Arm with Scroll
Grand Brass Lamp Parts

Backplate
Grand Brass Lamp Parts

7/8" Height Unfinished Brass Coupling
Use for flush mounts between canopy and shade holder. Didn't want to smother canopy with shade holder. Could be longer.
Grand Brass Lamp Parts. Also in 1" and 1-1/2" and 2" (which is also wider).

1" Cast Brass Loop with Wire Way, 1/8M
Grand Brass Lamp Parts

Solid Brass Oval Lamp Chain
Grand Brass Lamp Parts 1/8". Links are 1-1/2" x 7/8"

Chain Pliers
Grand Brass Lamp Parts

18/1 Wire, White Antique Gold
Grand Brass Lamp Parts

18/1 Wire, Oatmeal With Black Tracer
Grand Brass Lamp Parts

Bare Copper Ground Wire, 18 AWG
Grand Brass Lamp Parts

1" Cast Brass Loop with Wire Way, 1/8M
This will screw directly into socket for 6" (and 8") globes. Others get coupling and nipple.
Grand Brass Lamp Parts

Brass Ground Lug to slip 1/8 IP. All fixtures should have this.
Grand Brass Lamp Parts

9/16" Height Unfinished Brass Coupling.
One for every pendant shade holder, except 6" and 8" balls where the loop can screw into socket.
Grand Brass Lamp Parts

1/8 IP Solid Brass, All Thread Nipples: Choice of Lengths.
Use to extend the socket and bulb into the center for the larger shades. Maybe? 10"-1", 12"-2", 14"-3".
Socket top to bulb center: A19: 2" , A21: 2-3/4".
Grand Brass Lamp Parts

Medium Base Porcelain Socket, 2-1/4" High
Porches and bathrooms require Damp Location Rated. All will be damp rated.
Grand Brass Lamp Parts

For Exposed Bulbs in Cone Shades:
Kitchen (3000K):
 • Satco Dimmable 12.5W 3000K 90 CRI Filament LED Bulb. Bulbs.com
 • Bulbrite Dimmable 8.5W 3000K 90 CRI Filament LED Bulb. Bulbs.com
Other Rooms (2700K):
 • Satco Dimmable 12.5W 2700K 90 CRI Filament LED Bulb. Bulbs.com
 • Bulbrite Dimmable 8.5W 2700K 90 CRI Filament LED Bulb. Bulbs.com

Opal Cone Lampshades

14" W x 7"H. 6" Fitter
Available from Grand Brass

12"W x 5-1/2"H. 2-1/4" fitter. Vianne from France.
Available from Vintage Hardware & Lighting for $125 and Otteson Glass for $92. On stock runoff.

11-3/4"W x 4-1/8"H. 2-1/4" Fitter
Available from Sekelskifte [in Sweden. change country to US]

11-3/8"W x 4-3/4"H. 2-1/4" Fitter
Available from Victorian Emporium

10" W x 4-3/4" H. 2-1/4" Fitter
No longer available. Had been from Upgrade Lights through Amazon.

10" W x 4-5/8" H. 2-1/4 Fitter
Available from Antique Lamp Supply. Made in USA.

10"W x 5"H. 3-1/4" Fitter. Vianne from France.
Available from Yankee Barn for $85. On stock runoff.

9-1/2"W x 6"H. 2-1/4" Fitter
Available from School House

8"W x 2-3/4"H. 2-1/4" Fitter
Available from Sekelskifte [in Sweden. change country to US]

Rest of the House: Opal Glass Ball Lampshades (13)

First floor main house: 8' 9" (all chain)
First floor extension: 7' 10" (chain and flush mount)
Second floor main house: 7' 10" (all flush)
Second floor extension: 7' 6" (all flush)